PartsTable
Technical Data Sheet
Download PDF

A06315388 — RUBBER STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A06315388: RUBBER STRIP.

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 17.750 INCHES NOMINAL IN, material: RUBBER, special_features: BELL SHAPED HOLE IN CENTER OF STRIP ALONG LENGTH,TWO MOUNTING HOLES 3.000 IN. FROM EACH END IN, surface_condition: SMOOTH BOTH SIDES, fabrication_method: MOLDED, cross-sectional_width: 4.500 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-690-2266, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A06315388
NSN: 5330-00-690-2266
FSC: 5330 — Packing and Gasket Materials
CAGE: 09605 — BOMAG USA SUB OF UNITED DOMINION INDUSTRIES LTD (USA)
SPECIFICATIONS
length17.750 INCHES NOMINAL IN
materialRUBBER
special_featuresBELL SHAPED HOLE IN CENTER OF STRIP ALONG LENGTH,TWO MOUNTING HOLES 3.000 IN. FROM EACH END IN
surface_conditionSMOOTH BOTH SIDES
fabrication_methodMOLDED
cross-sectional_width4.500 INCHES NOMINAL IN
cross-sectional_height3.750 INCHES NOMINAL IN
cross-sectional_shape_styleD
NSN5330-00-690-2266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A06315388 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 17.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 3.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 4.500 INCHES NOMINAL IN
•
SURFACE CONDITION: SMOOTH BOTH SIDES
•
CROSS-SECTIONAL SHAPE STYLE: D
•
MATERIAL: RUBBER
•
FABRICATION METHOD: MOLDED
TECHNICAL CHARACTERISTICS
LENGTH17.750 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT3.750 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH4.500 INCHES NOMINAL IN
SURFACE CONDITIONSMOOTH BOTH SIDES
CROSS-SECTIONAL SHAPE STYLED
SPECIAL FEATURESBELL SHAPED HOLE IN CENTER OF STRIP ALONG LENGTH,TWO MOUNTING HOLES 3.000 IN. FROM EACH END IN
MATERIALRUBBER
FABRICATION METHODMOLDED
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
TYPEM4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
06315388Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A06315388?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A06315388?
A06315388 is a RUBBER STRIP.
What parts can replace A06315388?
There are 2 known substitutes for A06315388: TYPEM4, 06315388. Substitute compatibility should be verified for your specific system.
What is the NSN for A06315388?
A06315388 is cataloged in the U.S. Government catalog under NSN 5330-00-690-2266. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A06315388