PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A02DS232-1
A02DS232-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.5866 INCHES MINIMUM AND 0.5905 INCHES MAXIMUM IN, cone_width: 0.9921 INCHES MINIMUM AND 0.9941 INCHES MAXIMUM IN, bore_diameter: 2.4409 INCHES NOMINAL IN, overall_width: 1.0630 INCHES MINIMUM AND 1.0669 INCHES MAXIMUM IN, style_designator: STRAIGHT BORE, NORMAL ANGLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-196-9603, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A02DS232-1
NSN: 3110-01-196-9603
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.5866 INCHES MINIMUM AND 0.5905 INCHES MAXIMUM IN
cone_width0.9921 INCHES MINIMUM AND 0.9941 INCHES MAXIMUM IN
bore_diameter2.4409 INCHES NOMINAL IN
overall_width1.0630 INCHES MINIMUM AND 1.0669 INCHES MAXIMUM IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
backface_corner_radius0.0300 INCHES NOMINAL IN
overall_outside_diameter3.8583 INCHES NOMINAL IN
NSN3110-01-196-9603
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A02DS232-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 2.4409 INCHES NOMINAL IN
•
CUP WIDTH: 0.5866 INCHES MINIMUM AND 0.5905 INCHES MAXIMUM IN
•
BACKFACE CORNER RADIUS: 0.0300 INCHES NOMINAL IN
•
CONE WIDTH: 0.9921 INCHES MINIMUM AND 0.9941 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 3.8583 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
BORE DIAMETER2.4409 INCHES NOMINAL IN
CUP WIDTH0.5866 INCHES MINIMUM AND 0.5905 INCHES MAXIMUM IN
BACKFACE CORNER RADIUS0.0300 INCHES NOMINAL IN
CONE WIDTH0.9921 INCHES MINIMUM AND 0.9941 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER3.8583 INCHES NOMINAL IN
OVERALL WIDTH1.0630 INCHES MINIMUM AND 1.0669 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
A43869Interchangeable
interchangeable cross-reference
interchangeable
A43868Interchangeable
interchangeable cross-reference
interchangeable
17056Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A02DS232-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A02DS232-1?
A02DS232-1 is a BEARING,ROLLER,TAPERED.
What parts can replace A02DS232-1?
There are 3 known substitutes for A02DS232-1: A43869, A43868, 17056. Substitute compatibility should be verified for your specific system.
What is the NSN for A02DS232-1?
A02DS232-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-196-9603. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A02DS232-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026