PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A019
A019 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TANK,PRESSURE is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.750 INCHES NOMINAL IN, outside_diameter: 1.188 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN, burst_test_pressure: 500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS, inside_surface_condition: SMOOTH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-038-9624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A019
NSN: 5330-00-038-9624
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.750 INCHES NOMINAL IN
outside_diameter1.188 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN
burst_test_pressure500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data12 SIZE
specification/standard_data81349-MIL-H-7938 GOVERNMENT SPECIFICATION
layer_composition_and_location1ST LAYER BRAIDED ASBESTOS CORD AND 2ND LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
outer_covering_environmental_protectionABRASION RESISTANT AND FIRE RETARDANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF
NSN5330-00-038-9624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A019 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 4
•
APERTURE DIAMETER: 1.718 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 3.968 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.843 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY4
APERTURE DIAMETER1.718 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALPAPER OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER3.968 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.843 INCHES NOMINAL IN
HOLE DIAMETER0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
A-019 BLACKInterchangeable
interchangeable cross-reference
interchangeable
A019Interchangeable
interchangeable cross-reference
interchangeable
SA688-101Interchangeable
interchangeable cross-reference
interchangeable
60-0019Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-7938Interchangeable
interchangeable cross-reference
interchangeable
LC-058GH-08SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A019?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A019?
A019 is a TANK,PRESSURE.
What parts can replace A019?
There are 12 known substitutes for A019: A-019 BLACK, A019, SA688-101 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A019?
A019 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-038-9624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A019

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026