PartsTable
Technical Data Sheet
Download PDF

A000134-FIND17 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

A000134-FIND17: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, stud_length: 3.5000 INCHES NOMINAL IN, stud_diameter: 1.5000 INCHES NOMINAL IN, thread_length: 1.5000 INCHES NOMINAL IN, overall_length: 5.7500 INCHES NOMINAL IN, outer_ring_width: 2.2500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-386-8517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A000134-FIND17
NSN: 3110-01-386-8517
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60587 — FEDERAL EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
stud_length3.5000 INCHES NOMINAL IN
seal_quantity2
stud_diameter1.5000 INCHES NOMINAL IN
thread_length1.5000 INCHES NOMINAL IN
overall_length5.7500 INCHES NOMINAL IN
outer_ring_width2.2500 INCHES NOMINAL IN
style_designatorCAM FOLLOWER
bearing_seal_typeCONTACT
overall_outside_diameter4.0000 INCHES NOMINAL IN
NSN3110-01-386-8517
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A000134-FIND17 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
OUTER RING WIDTH: 2.2500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 4.0000 INCHES NOMINAL IN
•
STUD LENGTH: 3.5000 INCHES NOMINAL IN
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
OUTER RING WIDTH2.2500 INCHES NOMINAL IN
THREAD LENGTH1.5000 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH5.7500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.0000 INCHES NOMINAL IN
STUD LENGTH3.5000 INCHES NOMINAL IN
SEAL QUANTITY2
MATERIALSTEEL OUTER RING
MATERIALSTEEL END PLATE
SUBSTITUTES & CROSS-REFERENCES 1
A000151-FIND2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A000134-FIND17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A000134-FIND17?
A000134-FIND17 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace A000134-FIND17?
There is 1 known substitute for A000134-FIND17: A000151-FIND2. Substitute compatibility should be verified for your specific system.
What is the NSN for A000134-FIND17?
A000134-FIND17 is cataloged in the U.S. Government catalog under NSN 3110-01-386-8517. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A000134-FIND17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.