PartsTable
Technical Data Sheet
Download PDF

A-57003-22 — FERRULE,HANDLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A-57003-22: FERRULE,HANDLE.

The FERRULE,HANDLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL, recess_depth: 0.2198 INCHES NOMINAL0.2198 INCHES NOMINAL IN, hole_diameter: 0.1910 INCHES MINIMUM AND 0.1910 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM0.1970 INCHES MAXIMUM IN, overall_height: 0.3070 INCHES MINIMUM AND 0.3070 INCHES MINIMUM AND 0.3250 INCHES MAXIMUM0.3250 INCHES MAXIMUM IN, recess_diameter: 0.3150 INCHES MINIMUM AND 0.3150 INCHES MINIMUM AND 0.3250 INCHES MAXIMUM0.3250 INCHES MAXIMUM IN, outside_diameter: 0.7450 INCHES MINIMUM AND 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM0.7550 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-451-5408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-57003-22
NSN: 5340-01-451-5408
FSC: 5340 — Hardware, Commercial
CAGE: 0GCW4 — GLOBE ELECTRONIC HARDWARE, INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL
recess_depth0.2198 INCHES NOMINAL0.2198 INCHES NOMINAL IN
hole_diameter0.1910 INCHES MINIMUM AND 0.1910 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM0.1970 INCHES MAXIMUM IN
overall_height0.3070 INCHES MINIMUM AND 0.3070 INCHES MINIMUM AND 0.3250 INCHES MAXIMUM0.3250 INCHES MAXIMUM IN
recess_diameter0.3150 INCHES MINIMUM AND 0.3150 INCHES MINIMUM AND 0.3250 INCHES MAXIMUM0.3250 INCHES MAXIMUM IN
outside_diameter0.7450 INCHES MINIMUM AND 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM0.7550 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
material_document_and_classificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625, TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-451-5408
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A-57003-22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.7450 INCHES MINIMUM AND 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM0.7550 INCHES MAXIMUM IN
•
RECESS DEPTH: 0.2198 INCHES NOMINAL0.2198 INCHES NOMINAL IN
•
RECESS DIAMETER: 0.3150 INCHES MINIMUM AND 0.3150 INCHES MINIMUM AND 0.3250 INCHES MAXIMUM0.3250 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.3070 INCHES MINIMUM AND 0.3070 INCHES MINIMUM AND 0.3250 INCHES MAXIMUM0.3250 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625, TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.7450 INCHES MINIMUM AND 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM0.7550 INCHES MAXIMUM IN
RECESS DEPTH0.2198 INCHES NOMINAL0.2198 INCHES NOMINAL IN
RECESS DIAMETER0.3150 INCHES MINIMUM AND 0.3150 INCHES MINIMUM AND 0.3250 INCHES MAXIMUM0.3250 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 OVERALL
HOLE DIAMETER0.1910 INCHES MINIMUM AND 0.1910 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM0.1970 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A-57003-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-57003-22?
A-57003-22 is a FERRULE,HANDLE.
What is the NSN for A-57003-22?
A-57003-22 is cataloged in the U.S. Government catalog under NSN 5340-01-451-5408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-57003-22

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.