A-505-5 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

A-505-5: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include phase: THREE INPUT, material: COPPER ALLOY OVERALL, duty_cycle: CONTINUOUS, shaft_type: ROUND SINGLE ACTUATOR, body_length: 1.750 INCHES NOMINAL IN, temp_rating: 50.0 AMBIENT CELSIUS. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-493-1228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ A-505-5

NSN: 5930-00-493-1228
NIINs: 004931228, 005491816, 010316430, 015282428
FSC: 5930 — Switches
CAGE: 12598 — RLC ELECTRONICS, INC (USA)

SPECIFICATIONS

phase	THREE INPUT
material	COPPER ALLOY OVERALL
duty_cycle	CONTINUOUS
shaft_type	ROUND SINGLE ACTUATOR
body_length	1.750 INCHES NOMINAL IN
temp_rating	50.0 AMBIENT CELSIUS
keyway_depth	0.250 INCHES NOMINAL SINGLE END IN
keyway_width	0.500 INCHES NOMINAL SINGLE END IN
power_rating	36.000 HORSEPOWER OUTPUT
shaft_length	1.625 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
winding_type	INDUCTION-SQUIRREL CAGE
NSN	5930-00-493-1228

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL AT 9:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DETENT ROTATIONAL TORQUE RANGE: +1.000 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN

•

CONTACT LOAD CURRENT RATING: 350.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND SINGLE ACTUATOR
OVERALL HEIGHT	1.031 INCHES NOMINAL IN
SHAFT DIAMETER	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL AT 9:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
DETENT ROTATIONAL TORQUE RANGE	+1.000 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN
CONTACT LOAD CURRENT RATING	350.0 MILLIAMPERES RESISTIVE LOAD DC AT ALTITUDE
CONTACT LOAD CURRENT RATING	225.0 MILLIAMPERES RESISTIVE LOAD HIGHEST AC VOLTAGE RATING AT SEA LEVEL
CONTACT LOAD CURRENT RATING	500.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL

SUBSTITUTES & CROSS-REFERENCES 2

212-21086-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

SM-C-605018Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy A-505-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A-505-5?

A-505-5 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace A-505-5?

There are 2 known substitutes for A-505-5: 212-21086-2, SM-C-605018. Substitute compatibility should be verified for your specific system.

What is the NSN for A-505-5?

A-505-5 is cataloged in the U.S. Government catalog under NSN 5930-00-493-1228. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A-505-5 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — A-505-5