PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A-41328
A-41328 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 1.8180 INCHES MINIMUM AND 1.8260 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.6290 INCHES MINIMUM AND 0.6600 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: TAPERED ROLLERS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-288-5757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-41328
NSN: 3110-01-288-5757
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter1.8180 INCHES MINIMUM AND 1.8260 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.6290 INCHES MINIMUM AND 0.6600 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorTAPERED ROLLERS
end_item_identificationNSN 2330-01-275-7474 HEMAT TRAILER
overall_outside_diameter3.3650 INCHES MAXIMUM IN
thrust_directional_capability_designationDOUBLE
NSN3110-01-288-5757
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A-41328 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL ROLLER
•
STYLE DESIGNATOR: TAPERED ROLLERS
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.8180 INCHES MINIMUM AND 1.8260 INCHES MAXIMUM IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: DOUBLE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL ROLLER
MATERIALSTEEL OUTER RING
END ITEM IDENTIFICATIONNSN 2330-01-275-7474 HEMAT TRAILER
STYLE DESIGNATORTAPERED ROLLERS
SURFACE FINISHGROUND
OVERALL HEIGHT0.6290 INCHES MINIMUM AND 0.6600 INCHES MAXIMUM IN
BORE DIAMETER1.8180 INCHES MINIMUM AND 1.8260 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONDOUBLE
MATERIALSTEEL INNER RING
MATERIALRUBBER SYNTHETIC SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
ZZ-T-410Interchangeable
interchangeable cross-reference
interchangeable
2610PL1748768Interchangeable
interchangeable cross-reference
interchangeable
9.00-10Interchangeable
interchangeable cross-reference
interchangeable
C4319Interchangeable
interchangeable cross-reference
interchangeable
T1920Interchangeable
interchangeable cross-reference
interchangeable
R71Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A-41328?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-41328?
A-41328 is a BEARING,ROLLER,THRUST.
What parts can replace A-41328?
There are 26 known substitutes for A-41328: ZZ-T-410, 2610PL1748768, 9.00-10 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A-41328?
A-41328 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-288-5757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-41328

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026