PartsTable
Technical Data Sheet
Download PDF

A-4-L-7 — SLEEVE,HOSE CONNECTOR

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

A-4-L-7: SLEEVE,HOSE CONNECTOR.

The SLEEVE,HOSE CONNECTOR is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, overall_length: 0.781 INCHES NOMINAL IN, special_features: UNTHD FEMALE ENDS AND HEX WRENCHING FACILITY, width_across_flats: 0.625 INCHES NOMINAL IN, hose_inside_diameter_for_which_designed: 0.250 INCHES NOMINAL IN, hose/tube_outside_diameter_for_which_designed: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-252-9190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-4-L-7
NSN: 4730-01-252-9190
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 3T9T9 — SWAGELOK CO (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
overall_length0.781 INCHES NOMINAL IN
special_featuresUNTHD FEMALE ENDS AND HEX WRENCHING FACILITY
width_across_flats0.625 INCHES NOMINAL IN
hose_inside_diameter_for_which_designed0.250 INCHES NOMINAL IN
hose/tube_outside_diameter_for_which_designed0.438 INCHES NOMINAL IN
NSN4730-01-252-9190
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: A-4-L-7 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOSE INSIDE DIAMETER FOR WHICH DESIGNED: 0.250 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY
•
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HOSE INSIDE DIAMETER FOR WHICH DESIGNED0.250 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
OVERALL LENGTH0.781 INCHES NOMINAL IN
SPECIAL FEATURESUNTHD FEMALE ENDS AND HEX WRENCHING FACILITY
MATERIALALUMINUM ALLOY
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
A-4-6-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A-4-L-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-4-L-7?
A-4-L-7 is a SLEEVE,HOSE CONNECTOR.
What parts can replace A-4-L-7?
There is 1 known substitute for A-4-L-7: A-4-6-7. Substitute compatibility should be verified for your specific system.
What is the NSN for A-4-L-7?
A-4-L-7 is cataloged in the U.S. Government catalog under NSN 4730-01-252-9190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-4-L-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.