PartsTable
Technical Data Sheet
PartsTable / O-RING / A-325SR310-70
A-325SR310-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-076-6382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-325SR310-70
NSN: 5331-01-076-6382
FSC: 5331 — O-RING
CAGE: 27055 — GROVER CORPORATION DBA GROVER PISTON RING CO (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-01-076-6382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A-325SR310-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
042130Interchangeable
interchangeable cross-reference
interchangeable
0042130Interchangeable
interchangeable cross-reference
interchangeable
1429Interchangeable
interchangeable cross-reference
interchangeable
15097-11Interchangeable
interchangeable cross-reference
interchangeable
2-325V776-70Interchangeable
interchangeable cross-reference
interchangeable
AS586B-325Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A-325SR310-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-325SR310-70?
A-325SR310-70 is a O-RING.
What parts can replace A-325SR310-70?
There are 8 known substitutes for A-325SR310-70: 042130, 0042130, 1429 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A-325SR310-70?
A-325SR310-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-076-6382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-325SR310-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026