PartsTable
Technical Data Sheet
PartsTable / MRO / A-3044A
A-3044A ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.625 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.017 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-373-2025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A-3044A
NSN: 5340-00-373-2025
FSC: 5340
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.625 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.017 INCHES NOMINAL IN
loop_inside_diameter0.375 INCHES NOMINAL IN
cushioning_environmental_protectionFLAME RESISTANT
distance_from_loop_center_to_tongue_end0.702 INCHES NOMINAL IN
operating_current_rating_per_function_in_amps4.0 BLANK LOCATION NOT OTHERWISE SPECIFIED
operating_voltage_rating_and_type_per_function28.0 VOLTS DC BLANK LOCATION NOT OTHERWISE SPECIFIED
center_to_center_distance_between_loop_and_mounting_hole0.437 INCHES NOMINAL IN
NSN5340-00-373-2025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A-3044A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
MATERIAL THICKNESS: 0.017 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: FLAME RESISTANT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.702 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC CUSHION
MATERIAL THICKNESS0.017 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY BAND
CUSHIONING ENVIRONMENTAL PROTECTIONFLAME RESISTANT
DISTANCE FROM LOOP CENTER TO TONGUE END0.702 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.375 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
S080477Interchangeable
interchangeable cross-reference
interchangeable
080477Interchangeable
interchangeable cross-reference
interchangeable
A-3044AInterchangeable
interchangeable cross-reference
interchangeable
A-3044Interchangeable
interchangeable cross-reference
interchangeable
C3044-3-92Interchangeable
Same NIIN cross-reference
interchangeable
80477-001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A-3044A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-3044A?
A-3044A is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace A-3044A?
There are 6 known substitutes for A-3044A: S080477, 080477, A-3044A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A-3044A?
A-3044A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-373-2025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-3044A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026