PartsTable
Technical Data Sheet
A-264SR277-70 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL, center_hole_diameter: 7.500 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: O-RING, nondefinitive_spec/std_data: 1 TYPE AND 1 CLASS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-892-2558, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-264SR277-70
NSN: 5330-00-892-2558
FSC: 5330
CAGE: 95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
center_hole_diameter7.500 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
cross-sectional_shape_styleO-RING
nondefinitive_spec/std_data1 TYPE AND 1 CLASS
NSN5330-00-892-2558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A-264SR277-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS
CROSS-SECTIONAL SHAPE STYLE: O-RING
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
MATERIAL: RUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER: 7.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS
CROSS-SECTIONAL SHAPE STYLEO-RING
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER7.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
3AX100Interchangeable
interchangeable cross-reference
interchangeable
7-5081 ITEM 54Interchangeable
interchangeable cross-reference
interchangeable
002017Interchangeable
interchangeable cross-reference
interchangeable
22046-14Interchangeable
interchangeable cross-reference
interchangeable
MILR25897Interchangeable
interchangeable cross-reference
interchangeable
4400173-0140Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy A-264SR277-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-264SR277-70?
A-264SR277-70 is a PACKING,PREFORMED.
What parts can replace A-264SR277-70?
There are 15 known substitutes for A-264SR277-70: 3AX100, 7-5081 ITEM 54, 002017 and 12 more. Substitute compatibility should be verified for your specific system.
Is A-264SR277-70 still available?
A-264SR277-70 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-264SR277-70