PartsTable
Technical Data Sheet
Download PDF

A-20132 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

A-20132: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include bore_diameter: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: OIL IMPREGNATED BALL,CASE HARDENED AND OVERLAPPING WASHERS,BEARING PACKED W/HIGH TEMP GREASE, style_designator: CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-516-5399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-20132
NSN: 3110-00-516-5399
NIINs: 005165399, 011436606
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 00658 — ABC ACQUISITION COMPANY DBA AETNA BEARING COMPANY (USA)
SPECIFICATIONS
bore_diameter1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresOIL IMPREGNATED BALL,CASE HARDENED AND OVERLAPPING WASHERS,BEARING PACKED W/HIGH TEMP GREASE
style_designatorCLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
overall_outside_diameter2.7975 INCHES MINIMUM AND 2.8275 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
thrust_directional_capability_designationSINGLE
NSN3110-00-516-5399
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A-20132 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 2.7975 INCHES MINIMUM AND 2.8275 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
OVERALL HEIGHT0.6200 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORCLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER2.7975 INCHES MINIMUM AND 2.8275 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL IMPREGNATED BALL,CASE HARDENED AND OVERLAPPING WASHERS,BEARING PACKED W/HIGH TEMP GREASE
BORE DIAMETER1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
635529Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A2013MILL3545Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A-20132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-20132?
A-20132 is a BEARING,BALL,THRUST.
What parts can replace A-20132?
There are 2 known substitutes for A-20132: 635529, A2013MILL3545. Substitute compatibility should be verified for your specific system.
What is the NSN for A-20132?
A-20132 is cataloged in the U.S. Government catalog under NSN 3110-00-516-5399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-20132