PartsTable
Technical Data Sheet
Download PDF

A-17535 TYPE 1 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A-17535 TYPE 1: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: WINDOW GASKET. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-587-9955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-17535 TYPE 1
NSN: 5330-00-587-9955
NIINs: 005879955, 013512778
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyWINDOW GASKET
NSN5330-00-587-9955
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A-17535 TYPE 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.375 INCHES NOMINAL IN
•
INNER GROOVE DEPTH: 0.234 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 4.625 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 4.031 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.375 INCHES NOMINAL IN
INNER GROOVE DEPTH0.234 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER4.625 INCHES NOMINAL IN
INNER GROOVE WIDTH0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
CENTER HOLE DIAMETER4.031 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
A-17535 TY IReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5330PL1276588Reference document
Same NSN cross-reference
Reference document — Informative reference only
A-17535Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
A-17535TY1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10-1596-1 PIECE 10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A-17535 TYPE 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-17535 TYPE 1?
A-17535 TYPE 1 is a PACKING,PREFORMED.
What parts can replace A-17535 TYPE 1?
There are 5 known substitutes for A-17535 TYPE 1: A-17535 TY I, 5330PL1276588, A-17535 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A-17535 TYPE 1?
A-17535 TYPE 1 is cataloged in the U.S. Government catalog under NSN 5330-00-587-9955. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-17535 TYPE 1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.