PartsTable
Technical Data Sheet
Download PDF

A-114TH1167 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A-114TH1167: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-222-1818, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-114TH1167
NSN: 5331-00-222-1818
FSC: 5331 — O-ring
CAGE: 95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-222-1818
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A-114TH1167 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.818 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
TEMP RATING-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.818 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
SUBSTITUTES & CROSS-REFERENCES 7
2-114 S355-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
114950-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
114-11737Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S8990-114Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS9386-114Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS9386-114ESReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A-114TH1167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-114TH1167?
A-114TH1167 is a O-RING.
What parts can replace A-114TH1167?
There are 7 known substitutes for A-114TH1167: 2-114 S355-75, 114950-12, 114-11737 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A-114TH1167?
A-114TH1167 is cataloged in the U.S. Government catalog under NSN 5331-00-222-1818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-114TH1167

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.