PartsTable
Technical Data Sheet
Download PDF

A-028-5NS-0-01 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A-028-5NS-0-01: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY AND NICKEL ALLOY OVERALL, hole_diameter: 0.750 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND, end_item_identification: USED ON NIMITZ CLASS CVN, cross-sectional_shape_style: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-468-8011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-028-5NS-0-01
NSN: 5310-01-468-8011
FSC: 5310 — Nuts and Washers
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY AND NICKEL ALLOY OVERALL
hole_diameter0.750 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationUSED ON NIMITZ CLASS CVN
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-N-00281C FED SPEC ALL MATERIAL RESPONSES OVERALL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-01-468-8011
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A-028-5NS-0-01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-00281C FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY AND NICKEL ALLOY OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-00281C FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
END ITEM IDENTIFICATIONUSED ON NIMITZ CLASS CVN
MATERIALCOPPER ALLOY AND NICKEL ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
D-NSL-0-99-002Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
D-NSL-0-99-002 PC 20Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A-028-5NS-0-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-028-5NS-0-01?
A-028-5NS-0-01 is a WASHER,FLAT.
What parts can replace A-028-5NS-0-01?
There are 2 known substitutes for A-028-5NS-0-01: D-NSL-0-99-002, D-NSL-0-99-002 PC 20. Substitute compatibility should be verified for your specific system.
What is the NSN for A-028-5NS-0-01?
A-028-5NS-0-01 is cataloged in the U.S. Government catalog under NSN 5310-01-468-8011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-028-5NS-0-01