PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9X4 7-16
9X4 7-16 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.156 INCHES NOMINAL IN, diameter: 0.438 INCHES NOMINAL IN, material: STEEL COMP 1010 OR STEEL COMP B1111 OVERALL, head_style: FLAT, chamfer_length: 0.094 INCHES NOMINAL IN, style_designator: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-4786, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9X4 7-16
NSN: 5315-00-011-4786
FSC: 5315
CAGE: 61465 — GARWOOD/FELLER INC GARWOOD WINCH DIV (USA)
SPECIFICATIONS
height0.156 INCHES NOMINAL IN
diameter0.438 INCHES NOMINAL IN
materialSTEEL COMP 1010 OR STEEL COMP B1111 OVERALL
head_styleFLAT
chamfer_length0.094 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.562 INCHES NOMINAL IN
under_head_length1.234 INCHES NOMINAL IN
first_hole_diameter0.108 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5315-00-011-4786
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9X4 7-16 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
HEAD STYLE: FLAT
•
HEIGHT: 0.156 INCHES NOMINAL IN
•
PIN HEAD DIAMETER: 0.562 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP B1111 OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
HEAD STYLEFLAT
HEIGHT0.156 INCHES NOMINAL IN
PIN HEAD DIAMETER0.562 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
MATERIALSTEEL COMP 1010 OR STEEL COMP B1111 OVERALL
STYLE DESIGNATORSTRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
DIAMETER0.438 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.172 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
E12002CInterchangeable
interchangeable cross-reference
interchangeable
8930Interchangeable
interchangeable cross-reference
interchangeable
AT25451Interchangeable
interchangeable cross-reference
interchangeable
4466Interchangeable
interchangeable cross-reference
interchangeable
601150Interchangeable
interchangeable cross-reference
interchangeable
1C792-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9X4 7-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9X4 7-16?
9X4 7-16 is a PIN,STRAIGHT,HEADED.
What parts can replace 9X4 7-16?
There are 19 known substitutes for 9X4 7-16: E12002C, 8930, AT25451 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9X4 7-16?
9X4 7-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-4786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9X4 7-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026