PartsTable
Technical Data Sheet
Download PDF

9S-8750 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9S-8750: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include nut_style: HEXAGON, nut_height: 0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND, width_across_flats: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-579-0592, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9S-8750
NSN: 5310-00-579-0592
NIINs: 005790592, 011841992
FSC: 5310 — Nuts and Washers
CAGE: H0S39 — PON POWER B.V. (NLD)
SPECIFICATIONS
nut_styleHEXAGON
nut_height0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch20
nondefinitive_spec/std_data2 TYPE AND 4 STYLE
departure_from_cited_designatorAS MODIFIED BY MATERIAL
NSN5310-00-579-0592
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9S-8750 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MATERIAL
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 4 STYLE
•
NUT HEIGHT: 0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY MATERIAL
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 4 STYLE
NUT HEIGHT0.212 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH20
SUBSTITUTES & CROSS-REFERENCES 4
FFN836Reference document
Same NSN cross-reference
Reference document — Identification reference
1B4330Reference document
Same NSN cross-reference
Reference document — Secondary reference
S201H17Reference document
Same NSN cross-reference
Reference document — Secondary reference
S201417Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9S-8750?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9S-8750?
9S-8750 is a NUT,PLAIN,HEXAGON.
What parts can replace 9S-8750?
There are 4 known substitutes for 9S-8750: FFN836, 1B4330, S201H17 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9S-8750?
9S-8750 is cataloged in the U.S. Government catalog under NSN 5310-00-579-0592. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9S-8750