PartsTable
Technical Data Sheet
Download PDF

9M951C1 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9M951C1: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-351-9218, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9M951C1
NSN: 5340-01-351-9218
FSC: 5340 — Hardware, Commercial
CAGE: 04967 — FASTENER SPECIALTY, INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.000 INCHES NOMINAL IN
first_leg_length0.750 INCHES NOMINAL IN
second_leg_angle90.0 DEGREES NOMINAL
second_leg_styleCORNER RADIUS
second_leg_width1.000 INCHES NOMINAL IN
style_designatorDOUBLE ANGLE
features_providedNUT
second_leg_length0.750 INCHES NOMINAL IN
surface_treatmentPLASTIC EPOXY AND PLASTIC POLYAMIDE
NSN5340-01-351-9218
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9M951C1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.050 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.050 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
10113197Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9M951C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M951C1?
9M951C1 is a BRACKET,DOUBLE ANGLE.
What parts can replace 9M951C1?
There is 1 known substitute for 9M951C1: 10113197. Substitute compatibility should be verified for your specific system.
What is the NSN for 9M951C1?
9M951C1 is cataloged in the U.S. Government catalog under NSN 5340-01-351-9218. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9M951C1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.