The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN, overall_width: 0.575 INCHES NOMINAL0.575 INCHES NOMINAL IN, overall_length: 2.376 INCHES NOMINAL2.376 INCHES NOMINAL IN, special_features: NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2, style_designator: RECTANGULAR.
This part is cataloged in the U.S. Government catalog under NSN 5340-01-501-4652, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9M702-5A2
NSN:5340-01-501-4652 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
PLASTIC
block_height
0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN
overall_width
0.575 INCHES NOMINAL0.575 INCHES NOMINAL IN
overall_length
2.376 INCHES NOMINAL2.376 INCHES NOMINAL IN
special_features
NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter
0.766 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity
22
mounting_hole_diameter
0.205 INCHES MINIMUM AND 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM0.211 INCHES MAXIMUM IN
mounting_hole_quantity
11
supplementary_features
A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM)
NSN
5340-01-501-4652
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 11
•
CLAMPING HOLE QUANTITY: 22
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.469 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN
•
SUPPLEMENTARY FEATURES: A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM)
•
CRITICALITY CODE JUSTIFICATION: AGAVAGAV
•
STYLE DESIGNATOR: RECTANGULAR
•
MOUNTING HOLE DIAMETER: 0.205 INCHES MINIMUM AND 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM0.211 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
11
CLAMPING HOLE QUANTITY
22
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
0.469 INCHES NOMINAL IN
BLOCK HEIGHT
0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN
SUPPLEMENTARY FEATURES
A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM)
CRITICALITY CODE JUSTIFICATION
AGAVAGAV
STYLE DESIGNATOR
RECTANGULAR
MOUNTING HOLE DIAMETER
0.205 INCHES MINIMUM AND 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM0.211 INCHES MAXIMUM IN
OVERALL LENGTH
2.376 INCHES NOMINAL2.376 INCHES NOMINAL IN
OVERALL WIDTH
0.575 INCHES NOMINAL0.575 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M702-5A2?
9M702-5A2 is a CLAMP,BLOCK,SECTION.
What is the NSN for 9M702-5A2?
9M702-5A2 is cataloged in the U.S. Government catalog under NSN 5340-01-501-4652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.