The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN, overall_width: 0.433 INCHES NOMINAL0.433 INCHES NOMINAL IN, overall_length: 3.748 INCHES NOMINAL3.748 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-213-3783, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9M702-4B1
NSN:5340-01-213-3783 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
PLASTIC
block_height
0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN
overall_width
0.433 INCHES NOMINAL0.433 INCHES NOMINAL IN
overall_length
3.748 INCHES NOMINAL3.748 INCHES NOMINAL IN
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter
0.382 INCHES MINIMUM AND 0.398 INCHES MAXIMUM ALL HOLES IN
clamping_hole_quantity
44
mounting_hole_diameter
0.205 INCHES MINIMUM AND 0.205 INCHES MINIMUM AND 0.213 INCHES MAXIMUM0.213 INCHES MAXIMUM IN
mounting_hole_quantity
22
material_document_and_classification
P.S. 14280 GR B CL 2,CAGEC 76301 MFR REF SINGLE MATERIAL RESPONSE
distance_from_end_to_first_clamping_hole_center
0.624 INCHES NOMINAL IN
NSN
5340-01-213-3783
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 44
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES: 2.061 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.624 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: P.S. 14280 GR B CL 2,CAGEC 76301 MFR REF SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.205 INCHES MINIMUM AND 0.205 INCHES MINIMUM AND 0.213 INCHES MAXIMUM0.213 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
22
CLAMPING HOLE QUANTITY
44
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES
2.061 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
0.624 INCHES NOMINAL IN
BLOCK HEIGHT
0.630 INCHES NOMINAL0.630 INCHES NOMINAL IN
STYLE DESIGNATOR
RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION
P.S. 14280 GR B CL 2,CAGEC 76301 MFR REF SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.205 INCHES MINIMUM AND 0.205 INCHES MINIMUM AND 0.213 INCHES MAXIMUM0.213 INCHES MAXIMUM IN
OVERALL LENGTH
3.748 INCHES NOMINAL3.748 INCHES NOMINAL IN
OVERALL WIDTH
0.433 INCHES NOMINAL0.433 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M702-4B1?
9M702-4B1 is a CLAMP,BLOCK,SECTION.
What is the NSN for 9M702-4B1?
9M702-4B1 is cataloged in the U.S. Government catalog under NSN 5340-01-213-3783. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.