PartsTable
Technical Data Sheet
Download PDF

9M702-2A17 — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9M702-2A17: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN, overall_width: 0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN, overall_height: 0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN, overall_length: 0.968 INCHES NOMINAL0.968 INCHES NOMINAL IN, special_features: CLAMP,CLOCK-TUBE SUPPORT,PLASTIC;1 HOLE MOUNTING,1 HOLE CLAMPING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-542-7553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9M702-2A17
NSN: 5340-01-542-7553
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialPLASTIC
block_height0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN
overall_width0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN
overall_height0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN
overall_length0.968 INCHES NOMINAL0.968 INCHES NOMINAL IN
special_featuresCLAMP,CLOCK-TUBE SUPPORT,PLASTIC;1 HOLE MOUNTING,1 HOLE CLAMPING
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter0.390 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity1
mounting_hole_diameter0.205 INCHES NOMINAL0.205 INCHES NOMINAL IN
mounting_hole_quantity11
NSN5340-01-542-7553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9M702-2A17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 11
•
CLAMPING HOLE QUANTITY: 1
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.312 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MOUNTING HOLE DIAMETER: 0.205 INCHES NOMINAL0.205 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY11
OVERALL HEIGHT0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN
CLAMPING HOLE QUANTITY1
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.312 INCHES NOMINAL IN
BLOCK HEIGHT0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MOUNTING HOLE DIAMETER0.205 INCHES NOMINAL0.205 INCHES NOMINAL IN
OVERALL LENGTH0.968 INCHES NOMINAL0.968 INCHES NOMINAL IN
OVERALL WIDTH0.394 INCHES NOMINAL0.394 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER0.390 INCHES NOMINAL ALL HOLES IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9M702-2A17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M702-2A17?
9M702-2A17 is a CLAMP,BLOCK.
What is the NSN for 9M702-2A17?
9M702-2A17 is cataloged in the U.S. Government catalog under NSN 5340-01-542-7553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9M702-2A17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.