PartsTable
Technical Data Sheet
Download PDF

9M700BC1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9M700BC1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 1230 AND ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-304-7922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9M700BC1
NSN: 5340-01-304-7922
FSC: 5340 — Hardware, Commercial
CAGE: 04967 — FASTENER SPECIALTY, INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 1230 AND ALUMINUM ALLOY 2024
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
first_leg_length0.750 INCHES NOMINAL IN
second_leg_styleCORNER RADIUS
second_leg_width1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
special_featuresCOLOR GREEN
style_designatorANGLE
second_leg_length0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
surface_treatmentPLASTIC EPOXY
mounting_hole_typePLAIN
NSN5340-01-304-7922
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9M700BC1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.263 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MMS405,CAGEC 76301 MFR REF SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.263 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMMS405,CAGEC 76301 MFR REF SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SECOND LEG WIDTH1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
SECOND LEG LENGTH0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9M700BC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M700BC1?
9M700BC1 is a BRACKET,ANGLE.
What is the NSN for 9M700BC1?
9M700BC1 is cataloged in the U.S. Government catalog under NSN 5340-01-304-7922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9M700BC1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.