The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-121-2796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9M700-2N10R
NSN:5340-01-121-2796 FSC:5340 — Hardware, Commercial CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 2024
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
CORNER RADIUS
first_leg_width
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
first_leg_length
0.750 INCHES NOMINAL IN
second_leg_style
CORNER RADIUS
second_leg_width
0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
special_features
RIGHT HAND ASSEMBLY
style_designator
ANGLE
features_provided
NUT
second_leg_length
0.750 INCHES NOMINAL IN
surface_treatment
PRIMER
NSN
5340-01-121-2796
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.263 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MMS405 COLOR 34151 GREEN,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.263 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.500 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MMS405 COLOR 34151 GREEN,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M700-2N10R?
9M700-2N10R is a BRACKET,ANGLE.
What parts can replace 9M700-2N10R?
There is 1 known substitute for 9M700-2N10R: ST9M380-2N10R. Substitute compatibility should be verified for your specific system.
What is the NSN for 9M700-2N10R?
9M700-2N10R is cataloged in the U.S. Government catalog under NSN 5340-01-121-2796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.