PartsTable
Technical Data Sheet
Download PDF

9M696-102-179 — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9M696-102-179: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.438 INCHES NOMINAL IN, length: 2.154 INCHES NOMINAL IN, material: UNABLE TO DECODE, special_features: MATL:BRACKET STEEL,PIN STEEL;BRACKET PASSIVATED, style_designator: FLUSH LEVER ACTUATOR, surface_treatment: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-112-3530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9M696-102-179
NSN: 5340-01-112-3530
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
width1.438 INCHES NOMINAL IN
length2.154 INCHES NOMINAL IN
materialUNABLE TO DECODE
special_featuresMATL:BRACKET STEEL,PIN STEEL;BRACKET PASSIVATED
style_designatorFLUSH LEVER ACTUATOR
surface_treatmentUNABLE TO DECODE
bolt_offset_distance0.179 INCHES NOMINAL IN
lever_offset_distance0.102 INCHES NOMINAL IN
mounting_hole_diameter0.098 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width1.062 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
NSN5340-01-112-3530
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9M696-102-179 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT OFFSET DISTANCE: 0.179 INCHES NOMINAL IN
•
LENGTH: 2.154 INCHES NOMINAL IN
•
LEVER OFFSET DISTANCE: 0.102 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.062 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BOLT OFFSET DISTANCE0.179 INCHES NOMINAL IN
LENGTH2.154 INCHES NOMINAL IN
LEVER OFFSET DISTANCE0.102 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.062 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
SPECIAL FEATURESMATL:BRACKET STEEL,PIN STEEL;BRACKET PASSIVATED
SURFACE TREATMENTUNABLE TO DECODE
WIDTH1.438 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9M696-102-179?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M696-102-179?
9M696-102-179 is a CATCH,FLUSH.
What is the NSN for 9M696-102-179?
9M696-102-179 is cataloged in the U.S. Government catalog under NSN 5340-01-112-3530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9M696-102-179

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.