PartsTable
Technical Data Sheet
Download PDF

9M696-072-188 — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9M696-072-188: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.398 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN, length: 2.146 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN, material: UNABLE TO DECODE, special_features: MATL:LEVR STEEL,BRACKET STEEL, style_designator: FLUSH LEVER ACTUATOR, surface_treatment: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-249-4432, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9M696-072-188
NSN: 5340-01-249-4432
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
width1.398 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN
length2.146 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN
materialUNABLE TO DECODE
special_featuresMATL:LEVR STEEL,BRACKET STEEL
style_designatorFLUSH LEVER ACTUATOR
surface_treatmentUNABLE TO DECODE
bolt_offset_distance0.188 INCHES NOMINAL IN
lever_offset_distance0.072 INCHES NOMINAL IN
mounting_hole_diameter0.098 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width1.052 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
center_to_center_distance_between_mounting_holes_along_length1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
NSN5340-01-249-4432
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9M696-072-188 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT OFFSET DISTANCE: 0.188 INCHES NOMINAL IN
•
LENGTH: 2.146 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN
•
LEVER OFFSET DISTANCE: 0.072 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.052 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BOLT OFFSET DISTANCE0.188 INCHES NOMINAL IN
LENGTH2.146 INCHES MINIMUM AND 2.186 INCHES MAXIMUM IN
LEVER OFFSET DISTANCE0.072 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.052 INCHES MINIMUM AND 1.092 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.123 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
SPECIAL FEATURESMATL:LEVR STEEL,BRACKET STEEL
SURFACE TREATMENTUNABLE TO DECODE
WIDTH1.398 INCHES MINIMUM AND 1.468 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
108L02-072-188AASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9486-072-188Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9M696-072-188?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M696-072-188?
9M696-072-188 is a CATCH,FLUSH.
What parts can replace 9M696-072-188?
There are 2 known substitutes for 9M696-072-188: 108L02-072-188AA, 9486-072-188. Substitute compatibility should be verified for your specific system.
What is the NSN for 9M696-072-188?
9M696-072-188 is cataloged in the U.S. Government catalog under NSN 5340-01-249-4432. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9M696-072-188

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.