PartsTable
Technical Data Sheet
Download PDF

9M175S107 — GROMMET,NONMETALLIC

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

9M175S107: GROMMET,NONMETALLIC.

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.212 INCHES NOMINAL IN, overall_height: 1.075 INCHES NOMINAL IN, flange_thickness: 0.192 INCHES NOMINAL IN, groove_outside_diameter: 0.675 INCHES NOMINAL IN, grommet_construction_type: SOLID. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-998-3323, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9M175S107
NSN: 5325-00-998-3323
FSC: 5325 — Fastening Devices
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.212 INCHES NOMINAL IN
overall_height1.075 INCHES NOMINAL IN
flange_thickness0.192 INCHES NOMINAL IN
groove_outside_diameter0.675 INCHES NOMINAL IN
grommet_construction_typeSOLID
large_flange_outside_diameter0.800 INCHES NOMINAL IN
NSN5325-00-998-3323
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9M175S107 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE THICKNESS: 0.192 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 0.800 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.675 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SOLID
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.212 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.075 INCHES NOMINAL IN
FLANGE THICKNESS0.192 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER0.800 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.675 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESOLID
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.212 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
S11K107-3SReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9M175S107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9M175S107?
9M175S107 is a GROMMET,NONMETALLIC.
What parts can replace 9M175S107?
There is 1 known substitute for 9M175S107: S11K107-3S. Substitute compatibility should be verified for your specific system.
What is the NSN for 9M175S107?
9M175S107 is cataloged in the U.S. Government catalog under NSN 5325-00-998-3323. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9M175S107