PartsTable
Technical Data Sheet
Download PDF

9L8714 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9L8714: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: STEEL, block_height: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, overall_length: 1.500 INCHES NOMINAL IN, surface_treatment: ZINC. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-110-8087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9L8714
NSN: 5340-01-110-8087
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL
block_height0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
overall_length1.500 INCHES NOMINAL IN
surface_treatmentZINC
clamping_hole_quantity3
NSN5340-01-110-8087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9L8714 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLAMPING HOLE QUANTITY: 3
•
BLOCK HEIGHT: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
CLAMPING HOLE QUANTITY3
BLOCK HEIGHT0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
OVERALL LENGTH1.500 INCHES NOMINAL IN
SURFACE TREATMENTZINC
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3CA635Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9L8714?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9L8714?
9L8714 is a CLAMP,BLOCK,SECTION.
What parts can replace 9L8714?
There is 1 known substitute for 9L8714: 3CA635. Substitute compatibility should be verified for your specific system.
What is the NSN for 9L8714?
9L8714 is cataloged in the U.S. Government catalog under NSN 5340-01-110-8087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9L8714

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.