PartsTable
Technical Data Sheet
Download PDF

9HB42 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

9HB42: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.163 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.750 INCHES NOMINAL IN, fastener_length: 0.750 INCHES NOMINAL IN, special_features: FINISH: TWO COATS DACROMET7 320 TWO COATS PLUS7 BLACK SEALER OR EQUIVALENT. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-485-3227, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9HB42
NSN: 5305-01-485-3227
FSC: 5305 — Screws
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.163 INCHES NOMINAL IN
thread_class2A A
thread_length0.750 INCHES NOMINAL IN
fastener_length0.750 INCHES NOMINAL IN
special_featuresFINISH: TWO COATS DACROMET7 320 TWO COATS PLUS7 BLACK SEALER OR EQUIVALENT
thread_directionRIGHT-HAND
width_between_flats0.438 INCHES NOMINAL IN
end_item_identification2320-01-465-2174
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-485-3227
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9HB42 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.163 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.163 INCHES NOMINAL IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.438 INCHES NOMINAL IN
SPECIAL FEATURESFINISH: TWO COATS DACROMET7 320 TWO COATS PLUS7 BLACK SEALER OR EQUIVALENT
THREAD CLASS2A A
END ITEM IDENTIFICATION2320-01-465-2174
SUBSTITUTES & CROSS-REFERENCES 1
107223Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9HB42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9HB42?
9HB42 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 9HB42?
There is 1 known substitute for 9HB42: 107223. Substitute compatibility should be verified for your specific system.
What is the NSN for 9HB42?
9HB42 is cataloged in the U.S. Government catalog under NSN 5305-01-485-3227. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9HB42