PartsTable
Technical Data Sheet
Download PDF

9D0006-3D — 9D0006-3D

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9D0006-3D: 9D0006-3D.

The 9D0006-3D is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 5340-01-453-9827, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9D0006-3D
NSN: 5340-01-453-9827
FSC: 5340 — Hardware, Commercial
CAGE: 88277 — THE BOEING COMPANY (USA)
SPECIFICATIONS
Part Number9D0006-3D
NSN5340-01-453-9827
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9D0006-3D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.4000 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.2500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.0980 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.3800 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.2460 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.4000 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.2500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.0980 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.3800 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.2460 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.2500 INCHES NOMINAL IN
SECOND LEG WIDTH0.8000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
TA4202DCSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HK9D06-3DSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AC12DC2U24V08Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9D0006-3D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9D0006-3D?
9D0006-3D is a 9D0006-3D.
What parts can replace 9D0006-3D?
There are 3 known substitutes for 9D0006-3D: TA4202DC, HK9D06-3D, AC12DC2U24V08. Substitute compatibility should be verified for your specific system.
What is the NSN for 9D0006-3D?
9D0006-3D is cataloged in the U.S. Government catalog under NSN 5340-01-453-9827. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9D0006-3D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.