PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9A234-4
9A234-4 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT, nut_length: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, head_height: 0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, nut_diameter: 0.322 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-697-2113, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9A234-4
NSN: 5310-00-697-2113
FSC: 5310
CAGE: 94033 — CARDWELL CONDENSER CORP LAPOINTE-ADMIRAL DIV (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT
nut_length0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
head_height0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
nut_diameter0.322 INCHES MAXIMUM IN
thread_class2B
head_diameter0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
shank_end_typeOPEN
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
NSN5310-00-697-2113
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9A234-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
•
NUT DIAMETER: 0.322 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
SHANK END TYPE: OPEN
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
NUT DIAMETER0.322 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
SHANK END TYPEOPEN
NOMINAL THREAD SIZE0.250 INCHES IN
THREAD QUANTITY PER INCH20
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY OVERALL
HEAD HEIGHT0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
TC-630Interchangeable
interchangeable cross-reference
interchangeable
A2580Interchangeable
interchangeable cross-reference
interchangeable
C7906-8Interchangeable
interchangeable cross-reference
interchangeable
4820PL1626715Interchangeable
interchangeable cross-reference
interchangeable
A4801Interchangeable
interchangeable cross-reference
interchangeable
9357-71-3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9A234-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9A234-4?
9A234-4 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 9A234-4?
There are 8 known substitutes for 9A234-4: TC-630, A2580, C7906-8 and 5 more. Substitute compatibility should be verified for your specific system.
Is 9A234-4 still available?
9A234-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9A234-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026