PartsTable
Technical Data Sheet
9997 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: FIBERBOARD LOCATION NOT OTHERWISE SPECIFIED, body_width: 0.250 INCHES NOMINAL IN, case_style: RECESSED, seal_width: 0.250 INCHES NOMINAL IN, body_height: 0.130 INCHES NOMINAL IN, body_length: 0.400 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-923-4736, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9997
NSN: 5330-00-923-4736
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialFIBERBOARD LOCATION NOT OTHERWISE SPECIFIED
body_width0.250 INCHES NOMINAL IN
case_styleRECESSED
seal_width0.250 INCHES NOMINAL IN
body_height0.130 INCHES NOMINAL IN
body_length0.400 INCHES MAXIMUM IN
inside_depth10.000 INCHES NOMINAL IN
inside_width12.000 INCHES NOMINAL IN
usage_designDOMESTIC
assembly_formFLAT
inside_length15.000 INCHES NOMINAL IN
closure_methodFLAPS
NSN5330-00-923-4736
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9997 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CASE STYLE: RECESSED
SEAL WIDTH: 0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 1.750 INCHES NOMINAL IN
SURFACE TREATMENT: PLASTIC CASE
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLERECESSED
SEAL WIDTH0.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.750 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
310Interchangeable
interchangeable cross-reference
interchangeable
2442263-1Interchangeable
interchangeable cross-reference
interchangeable
LM310NInterchangeable
interchangeable cross-reference
interchangeable
ASTM-D5118Interchangeable
interchangeable cross-reference
interchangeable
PPP-B-636Interchangeable
interchangeable cross-reference
interchangeable
0997Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9997?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9997?
9997 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 9997?
There are 10 known substitutes for 9997: 310, 2442263-1, LM310N and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9997?
9997 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-923-4736. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9997