PartsTable
Technical Data Sheet
Download PDF

9995717 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9995717: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, construction: SOLIDSOLID, aperture_width: 13.156 INCHES MINIMUM AND 13.156 INCHES MINIMUM AND 13.281 INCHES MAXIMUM13.281 INCHES MAXIMUM IN, aperture_length: 15.719 INCHES MINIMUM AND 15.719 INCHES MINIMUM AND 15.844 INCHES MAXIMUM15.844 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, fabrication_method: SOLIDSOLID. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-987-3121, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9995717
NSN: 5330-00-987-3121
FSC: 5330 — Packing and Gasket Materials
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
constructionSOLIDSOLID
aperture_width13.156 INCHES MINIMUM AND 13.156 INCHES MINIMUM AND 13.281 INCHES MAXIMUM13.281 INCHES MAXIMUM IN
aperture_length15.719 INCHES MINIMUM AND 15.719 INCHES MINIMUM AND 15.844 INCHES MAXIMUM15.844 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
fabrication_methodSOLIDSOLID
cross-sectional_width0.609 INCHES MINIMUM AND 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM0.641 INCHES MAXIMUM IN
cross-sectional_height0.297 INCHES MINIMUM AND 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM0.328 INCHES MAXIMUM IN
cross-sectional_thickness0.047 INCHES MINIMUM AND 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM0.078 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIALSPECIAL
cross_section_inside_diameter0.203 INCHES MINIMUM AND 0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM0.234 INCHES MAXIMUM IN
material_document_and_classificationASTM D2000 2BC515ABF3Z ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-987-3121
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9995717 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.047 INCHES MINIMUM AND 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM0.078 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.297 INCHES MINIMUM AND 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM0.328 INCHES MAXIMUM IN
•
CROSS-SECTIONAL WIDTH: 0.609 INCHES MINIMUM AND 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM0.641 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC515ABF3Z ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIALSPECIAL
•
APERTURE WIDTH: 13.156 INCHES MINIMUM AND 13.156 INCHES MINIMUM AND 13.281 INCHES MAXIMUM13.281 INCHES MAXIMUM IN
•
CROSS SECTION INSIDE DIAMETER: 0.203 INCHES MINIMUM AND 0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM0.234 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.047 INCHES MINIMUM AND 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM0.078 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.297 INCHES MINIMUM AND 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM0.328 INCHES MAXIMUM IN
CROSS-SECTIONAL WIDTH0.609 INCHES MINIMUM AND 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM0.641 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC515ABF3Z ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIALSPECIAL
APERTURE WIDTH13.156 INCHES MINIMUM AND 13.156 INCHES MINIMUM AND 13.281 INCHES MAXIMUM13.281 INCHES MAXIMUM IN
CROSS SECTION INSIDE DIAMETER0.203 INCHES MINIMUM AND 0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM0.234 INCHES MAXIMUM IN
APERTURE LENGTH15.719 INCHES MINIMUM AND 15.719 INCHES MINIMUM AND 15.844 INCHES MAXIMUM15.844 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 9995717?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9995717?
9995717 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for 9995717?
9995717 is cataloged in the U.S. Government catalog under NSN 5330-00-987-3121. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9995717

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.