PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 99832

99832 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The NETWORK,LINE BALANCING is a the manufacturer industrial component. Key specifications include tip_type: POZIDRIVE CROSS, overall_length: 4.000 INCHES NOMINAL IN, drive_shank_type: MALE STRAIGHT ROUND CENTER, FLATTED ON TWO SIDES, end_item_identification: COOPER/XCELITE SERIES 99 HANDLES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-286-3824, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99832
NSN: 5305-00-286-3824
FSC: 5305
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
tip_typePOZIDRIVE CROSS
overall_length4.000 INCHES NOMINAL IN
drive_shank_typeMALE STRAIGHT ROUND CENTER, FLATTED ON TWO SIDES
tip_size_designation2
end_item_identificationCOOPER/XCELITE SERIES 99 HANDLES
NSN5305-00-286-3824
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 99832 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW MATERIAL: STEEL
•
HEAD STYLE: BINDING
•
THREAD CLASS: 2A A
•
HEAD DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 56
•
HEAD HEIGHT: 0.048 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE II
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIALSTEEL
HEAD STYLEBINDING
THREAD CLASS2A A
HEAD DIAMETER0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD QUANTITY PER INCH56
HEAD HEIGHT0.048 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE II
THREAD LENGTH0.250 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
115-465Interchangeable
interchangeable cross-reference
interchangeable
272SC306Interchangeable
Network,line Balancing
interchangeable
5120-01-127-0719Interchangeable
Network,line Balancing
interchangeable
TMT-99-832Interchangeable
Network,line Balancing
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 99832?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99832?
99832 is a NETWORK,LINE BALANCING.
What parts can replace 99832?
There are 4 known substitutes for 99832: 115-465, 272SC306, 5120-01-127-0719 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 99832?
99832 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-286-3824. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99832

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026