PartsTable
Technical Data Sheet
Download PDF

9975M19P20 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9975M19P20: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, length: 1.120 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN, material: STEEL COMP 631 OVERALL, hole_diameter: 0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN, overall_height: 1.220 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-236-5925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9975M19P20
NSN: 5340-01-236-5925
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
width0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
length1.120 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
materialSTEEL COMP 631 OVERALL
hole_diameter0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
overall_height1.220 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
special_featuresTWO MTG HOLES SPACED 0.390 IN. MIN 0.410 IN. MAX APART; FORMING SHALL BE PERPENDICULAR TO DIRECTION OF ROLLING PORM 5.0 DEG; DRY FILM LUBRICANT IN
material_thickness0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
loop/holding_dimension0.985 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.537 INCHES NOMINAL IN
material_document_and_classificationAMS 5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-236-5925
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9975M19P20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.120 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.985 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.537 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.220 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
LENGTH1.120 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.985 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.537 INCHES NOMINAL IN
SPECIAL FEATURESTWO MTG HOLES SPACED 0.390 IN. MIN 0.410 IN. MAX APART; FORMING SHALL BE PERPENDICULAR TO DIRECTION OF ROLLING PORM 5.0 DEG; DRY FILM LUBRICANT IN
WIDTH0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
MATERIALSTEEL COMP 631 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9975M19P20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9975M19P20?
9975M19P20 is a CLIP,SPRING TENSION.
What is the NSN for 9975M19P20?
9975M19P20 is cataloged in the U.S. Government catalog under NSN 5340-01-236-5925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9975M19P20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.