PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9975846-6
9975846-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM BAND, lug_width: 1.000 INCHES NOMINAL IN, overall_width: 0.688 INCHES NOMINAL IN, style_designator: LEFT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-488-6553, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9975846-6
NSN: 5340-00-488-6553
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM BAND
lug_width1.000 INCHES NOMINAL IN
overall_width0.688 INCHES NOMINAL IN
style_designatorLEFT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.984 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.750 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.500 INCHES NOMINAL IN
NSN5340-00-488-6553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9975846-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: LEFT HAND CLAMP & BRACKET
•
MATERIAL: RUBBER CUSHION
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.734 INCHES NOMINAL IN
•
LUG WIDTH: 1.000 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.984 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORLEFT HAND CLAMP & BRACKET
MATERIALRUBBER CUSHION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.734 INCHES NOMINAL IN
LUG WIDTH1.000 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.984 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
20038Interchangeable
interchangeable cross-reference
interchangeable
MDC1102A-10Interchangeable
interchangeable cross-reference
interchangeable
MDC1102-10Interchangeable
interchangeable cross-reference
interchangeable
76810Interchangeable
interchangeable cross-reference
interchangeable
GB528BV1Interchangeable
interchangeable cross-reference
interchangeable
G27471-FIG 187Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9975846-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9975846-6?
9975846-6 is a CLAMP,LOOP.
What parts can replace 9975846-6?
There are 9 known substitutes for 9975846-6: 20038, MDC1102A-10, MDC1102-10 and 6 more. Substitute compatibility should be verified for your specific system.
Is 9975846-6 still available?
9975846-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9975846-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026