PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9975846-5
9975846-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM BAND, lug_width: 1.000 INCHES NOMINAL IN, overall_width: 0.688 INCHES NOMINAL IN, style_designator: LEFT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9975846-5
NSN: 5340-00-598-0067
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM BAND
lug_width1.000 INCHES NOMINAL IN
overall_width0.688 INCHES NOMINAL IN
style_designatorLEFT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.375 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.859 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.625 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.500 INCHES NOMINAL IN
NSN5340-00-598-0067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9975846-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.625 INCHES NOMINAL IN
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.609 INCHES NOMINAL IN
•
LUG HOLE DIAMETER: 0.199 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM BAND
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.625 INCHES NOMINAL IN
DIAMETER0.199 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.609 INCHES NOMINAL IN
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.500 INCHES NOMINAL IN
OVERALL WIDTH0.688 INCHES NOMINAL IN
MATERIALALUMINUM BAND
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
LUG WIDTH1.000 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
7686Interchangeable
interchangeable cross-reference
interchangeable
GS-4844Interchangeable
interchangeable cross-reference
interchangeable
38ENSIGN7686Interchangeable
interchangeable cross-reference
interchangeable
A7686Interchangeable
interchangeable cross-reference
interchangeable
1622-100Interchangeable
interchangeable cross-reference
interchangeable
519-1-2-1-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9975846-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9975846-5?
9975846-5 is a CLAMP,LOOP.
What parts can replace 9975846-5?
There are 14 known substitutes for 9975846-5: 7686, GS-4844, 38ENSIGN7686 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9975846-5?
9975846-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9975846-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026