The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, first_leg_angle: 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM, style_designator: ANGLE, first_leg_thickness: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, second_leg_thickness: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, material_document_and_classification: AMS5599 NATIONAL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-178-0220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9971M48G03
NSN:5340-01-178-0220 FSC:5340 — Hardware, Commercial CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
material
NICKEL ALLOY
first_leg_angle
89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM
special_features
1ST LEG CONTAINS A NUT-PLATE,BOTH LEGS 2 HOLES OF UNEQUAL DIA,0.280 IN. MIN TO 0.287 IN. MAX LARGE HOLE DIA,0.098 IN. MIN TO 0.102 IN. MAX SMALL HOLE DIA IN
style_designator
ANGLE
first_leg_thickness
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
second_leg_thickness
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
material_document_and_classification
AMS5599 NATIONAL SPEC SINGLE MATERIAL RESPONSE
second_leg_relationship_to_first_leg
NOT IDENTICAL
NSN
5340-01-178-0220
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG ANGLE: 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
STYLE DESIGNATOR: ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5599 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
SECOND LEG THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
FIRST LEG THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
MATERIAL: NICKEL ALLOY
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE
89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
STYLE DESIGNATOR
ANGLE
MATERIAL DOCUMENT AND CLASSIFICATION
AMS5599 NATIONAL SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
FIRST LEG THICKNESS
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
SPECIAL FEATURES
1ST LEG CONTAINS A NUT-PLATE,BOTH LEGS 2 HOLES OF UNEQUAL DIA,0.280 IN. MIN TO 0.287 IN. MAX LARGE HOLE DIA,0.098 IN. MIN TO 0.102 IN. MAX SMALL HOLE DIA IN
MATERIAL
NICKEL ALLOY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9971M48G03?
9971M48G03 is a BRACKET,ANGLE.
What parts can replace 9971M48G03?
There is 1 known substitute for 9971M48G03: 9971M48G01. Substitute compatibility should be verified for your specific system.
What is the NSN for 9971M48G03?
9971M48G03 is cataloged in the U.S. Government catalog under NSN 5340-01-178-0220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.