PartsTable
Technical Data Sheet
Download PDF

9971M11G02 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9971M11G02: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 625, first_leg_angle: 97.0 DEGREES MINIMUM AND 99.0 DEGREES MAXIMUM, special_features: 2 SPRING TENSION CLIPS RIVETED TO 1ST LEG, style_designator: ANGLE, mounting_hole_type: PLAIN, first_leg_thickness: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-236-4382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9971M11G02
NSN: 5340-01-236-4382
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialNICKEL ALLOY 625
first_leg_angle97.0 DEGREES MINIMUM AND 99.0 DEGREES MAXIMUM
special_features2 SPRING TENSION CLIPS RIVETED TO 1ST LEG
style_designatorANGLE
mounting_hole_typePLAIN
first_leg_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
second_leg_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
second_leg_hole_diameter0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
second_leg_hole_arrangement_styleTWO HOLES
material_document_and_classificationAMS 5599 ASSN STD SINGLE MATERIAL RESPONSE
second_leg_relationship_to_first_legNOT IDENTICAL
second_leg_distance_between_hole_centers_along_length1.600 INCHES NOMINAL IN
NSN5340-01-236-4382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9971M11G02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 97.0 DEGREES MINIMUM AND 99.0 DEGREES MAXIMUM
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE
•
SECOND LEG THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
FIRST LEG THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH: 1.600 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE97.0 DEGREES MINIMUM AND 99.0 DEGREES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
STYLE DESIGNATORANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5599 ASSN STD SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
FIRST LEG THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH1.600 INCHES NOMINAL IN
SPECIAL FEATURES2 SPRING TENSION CLIPS RIVETED TO 1ST LEG
MATERIALNICKEL ALLOY 625
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — mutilation + specific procedure
Ready to buy 9971M11G02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9971M11G02?
9971M11G02 is a BRACKET,ANGLE.
What is the NSN for 9971M11G02?
9971M11G02 is cataloged in the U.S. Government catalog under NSN 5340-01-236-4382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9971M11G02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.