Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY INSERT, hole_diameter: 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.687 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.820 INCHES NOMINAL IN, gage_ring_thickness: 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-181-4053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9954M14
NSN:5330-01-181-4053 FSC:5330 CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
material
NICKEL ALLOY INSERT
hole_diameter
0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
3.687 INCHES NOMINAL IN
style_designator
NON-CIRCULAR
aperture_diameter
2.820 INCHES NOMINAL IN
bolt_hole_quantity
4
gage_ring_thickness
0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
bolt_circle_diameter
2.687 INCHES NOMINAL IN
outside_corner_radius
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
cross-sectional_thickness
0.125 INCHES NOMINAL IN
side_radius_from_gasket_center
1.620 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
material_document_and_classification
AMS 5542 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5582 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5598 ASSN STD 3RD MATERIAL RESPONSE INSERT
NSN
5330-01-181-4053
COMPONENT DIAGRAM
KEY FEATURES
•
BOLT CIRCLE DIAMETER: 2.687 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 1.620 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
•
MATERIAL: NICKEL ALLOY INSERT
•
OUTSIDE CORNER RADIUS: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT CIRCLE DIAMETER
2.687 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER
1.620 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
OVERALL WIDTH
3.687 INCHES NOMINAL IN
HOLE DIAMETER
0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY
4
MATERIAL
NICKEL ALLOY INSERT
OUTSIDE CORNER RADIUS
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS
0.125 INCHES NOMINAL IN
MATERIAL
STEEL COMP 321 OR STEEL COMP 347 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE RETAINER
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9954M14?
9954M14 is a GASKET.
What parts can replace 9954M14?
There are 23 known substitutes for 9954M14: 277-3015, NP28.0-3.0, 270-0093-020 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9954M14?
9954M14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-181-4053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.