PartsTable
Technical Data Sheet
Download PDF

9943M20P01 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9943M20P01: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: NICKEL ALLOY 718 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, overall_length: 1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN, style_designator: STRAIGHT ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-214-3709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9943M20P01
NSN: 5340-01-214-3709
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialNICKEL ALLOY 718 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
overall_length1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
style_designatorSTRAIGHT ARCH
material_thickness0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
mounting_hole_size0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
inside_diameter/arch_length0.650 INCHES NOMINAL IN
material_document_and_classificationCOMP 718,B50TF15 CL-B,FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
distance_between_mounting_hole_centers0.900 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
NSN5340-01-214-3709
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9943M20P01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.900 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: STRAIGHT ARCH
•
MATERIAL DOCUMENT AND CLASSIFICATION: COMP 718,B50TF15 CL-B,FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL THICKNESS: 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.900 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORSTRAIGHT ARCH
MATERIAL DOCUMENT AND CLASSIFICATIONCOMP 718,B50TF15 CL-B,FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
OVERALL LENGTH1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
OVERALL WIDTH0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
MATERIAL THICKNESS0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9943M20P01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9943M20P01?
9943M20P01 is a STRAP,RETAINING.
What is the NSN for 9943M20P01?
9943M20P01 is cataloged in the U.S. Government catalog under NSN 5340-01-214-3709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9943M20P01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.