PartsTable
Technical Data Sheet
Download PDF

9942M96P02 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9942M96P02: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, diameter: 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN, material: COBALT ALLOY OVERALL, head_style: ROUND W/WRENCH FLATS, chamfer_length: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, special_features: SHANK IS FLATTED TWO SIDES 0.190 IN. WIDTH ACROSS FLATS AND PARALLEL W/WRENCH FLATS ON HEAD IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-177-5965, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9942M96P02
NSN: 5315-01-177-5965
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
height0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
diameter0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
materialCOBALT ALLOY OVERALL
head_styleROUND W/WRENCH FLATS
chamfer_length0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
special_featuresSHANK IS FLATTED TWO SIDES 0.190 IN. WIDTH ACROSS FLATS AND PARALLEL W/WRENCH FLATS ON HEAD IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
under_head_length0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
width_across_flats0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
first_hole_diameter0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
NSN5315-01-177-5965
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9942M96P02 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
CHAMFER LENGTH: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
CHAMFER LENGTH0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONB50TF74 CL-A,07482 MFR REF SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9942M96P02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9942M96P02?
9942M96P02 is a PIN,STRAIGHT,HEADED.
What is the NSN for 9942M96P02?
9942M96P02 is cataloged in the U.S. Government catalog under NSN 5315-01-177-5965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9942M96P02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.