9941M63P01 — SEAL,AIR,AIRCRAFT GAS TURBINE EN

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

9941M63P01: SEAL,AIR,AIRCRAFT GAS TURBINE EN.

SEAL,AIR,AIRCRAFT GAS TURBINE EN. Key specifications include material: STEEL OVERALL, design_type: AXIAL COMPRESSOR, overall_width: 1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN, overall_length: 1.780 INCHES MINIMUM AND 1.820 INCHES MAXIMUM IN, special_features: T.O. 2J-F101-4, FIG 70, IND 14; USED IN THE AUGMENTOR LINER, end_item_identification: ACFT ENG F101.

This part is cataloged in the U.S. Government catalog under NSN 2840-01-171-0876, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

9941M63P01

NSN: 2840-01-171-0876
FSC: 2840 — Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)

SPECIFICATIONS

material	STEEL OVERALL
design_type	AXIAL COMPRESSOR
overall_width	1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
overall_length	1.780 INCHES MINIMUM AND 1.820 INCHES MAXIMUM IN
special_features	T.O. 2J-F101-4, FIG 70, IND 14; USED IN THE AUGMENTOR LINER
end_item_identification	ACFT ENG F101
engine_section_location	TURBINE
criticality_code_justification	MATT AND ABHP AND ABMK AND AGAV
material_document_and_classification	AMS5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agency	ORIGINAL NAME SEAL,FUEL
NSN	2840-01-171-0876

COMPONENT DIAGRAM

KEY FEATURES

•

DESIGN TYPE: AXIAL COMPRESSOR

•

CRITICALITY CODE JUSTIFICATION: MATT AND ABHP AND ABMK AND AGAV

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

ENGINE SECTION LOCATION: TURBINE

TECHNICAL CHARACTERISTICS

DESIGN TYPE	AXIAL COMPRESSOR
CRITICALITY CODE JUSTIFICATION	MATT AND ABHP AND ABMK AND AGAV
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5513 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH	1.780 INCHES MINIMUM AND 1.820 INCHES MAXIMUM IN
OVERALL WIDTH	1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
ENGINE SECTION LOCATION	TURBINE
SPECIAL FEATURES	T.O. 2J-F101-4, FIG 70, IND 14; USED IN THE AUGMENTOR LINER
PART NAME ASSIGNED BY CONTROLLING AGENCY	ORIGINAL NAME SEAL,FUEL
END ITEM IDENTIFICATION	ACFT ENG F101
MATERIAL	STEEL OVERALL

OTHER ITEMS IN FSC 2840 — Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

2840-00-000-0048 2840-00-000-0049 2840-00-001-1741 2840-00-001-1743 2840-00-001-2117 2840-00-001-2284 2840-00-001-3922 2840-00-001-4903

SUBSTITUTES & CROSS-REFERENCES 3

AGC 3247Reference document

Same NSN cross-reference

Reference document — Secondary reference

SY9920-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

9941M63P02Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 9941M63P01?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 9941M63P01?

9941M63P01 is a SEAL,AIR,AIRCRAFT GAS TURBINE EN.

What parts can replace 9941M63P01?

There are 3 known substitutes for 9941M63P01: AGC 3247, SY9920-3, 9941M63P02. Substitute compatibility should be verified for your specific system.

What is the NSN for 9941M63P01?

9941M63P01 is cataloged in the U.S. Government catalog under NSN 2840-01-171-0876. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

9941M63P01 — SEAL,AIR,AIRCRAFT GAS TURBINE EN

Request a Quote — 9941M63P01