PartsTable
Technical Data Sheet
99417 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 OVERALL, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, overall_height: 0.170 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, material_document_and_classification: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-630-9828, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99417
NSN: 5340-00-630-9828
FSC: 5340
CAGE: 61864 — TRW ASSEMBLIES AND FASTENERS GROUP (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OVERALL
hole_diameter0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
overall_height0.170 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-630-9828
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 99417 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL: STEEL COMP 1050 OVERALL
HOLE DIAMETER: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1050 OVERALL
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONW/S:GENERATOR SET, TACT QUIET, 10KW, 400HZ, MEP-813A; GENERATOR SET, 10KW, 60HZ, SKID-MOUNTED (2ID)(MEP-0003A); GENERATOR, 10KW, DIESEL, MILITARY STANDARD FAMILY; SUPPORT EQUIPMENT, C-5 AIRCRAFT; TRAILER, SEMI, TANK, 5000 GAL, BULK; RADAR SET, FIREFINDER (AN/TPQ-36); AIRCRAFT, PHANTOM F-4; SEMI-TRAILER, 5000 GAL, REFUELER, 4X4, M970; AIRCRAFT, HERCULES C-130 A
OVERALL HEIGHT0.170 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
10405-1Interchangeable
interchangeable cross-reference
interchangeable
5186Interchangeable
interchangeable cross-reference
interchangeable
660.1Interchangeable
interchangeable cross-reference
interchangeable
5867559190Interchangeable
interchangeable cross-reference
interchangeable
54-8025Interchangeable
interchangeable cross-reference
interchangeable
DS-934361Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 99417?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99417?
99417 is a CLIP,SPRING TENSION.
What parts can replace 99417?
There are 8 known substitutes for 99417: 10405-1, 5186, 660.1 and 5 more. Substitute compatibility should be verified for your specific system.
Is 99417 still available?
99417 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99417