PartsTable / O-RING / 99334
99334
✓ Verified by PartsTable
Verbatim · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The TERMINAL,STUD is a Verbatim industrial component. Key specifications include material: COPPER ALLOY OVERALL, slot_depth: 0.150 INCHES SINGLE END IN, slot_width: 0.045 INCHES SINGLE END IN, overall_height: 0.257 INCHES IN, terminal_length: 0.170 INCHES IN, largest_diameter: 0.094 INCHES SINGLE END IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-599-2821, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
99334
NSN: 5331-00-599-2821 FSC: 5331 — O-RINGCAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
material COPPER ALLOY OVERALL slot_depth 0.150 INCHES SINGLE END IN slot_width 0.045 INCHES SINGLE END IN overall_height 0.257 INCHES IN terminal_length 0.170 INCHES IN largest_diameter 0.094 INCHES SINGLE END IN overall_diameter 0.094 INCHES IN basic_shape_style NONTUBULAR, ROUND precious_material GOLD surface_treatment GOLD OVERALL SINGLE LAYER center_hole_diameter 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN minor_bushing_length 0.025 INCHES IN NSN 5331-00-599-2821
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 99334
MFR: Verbatim
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.121 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
• MATERIAL: RUBBER SYNTHETIC
• CENTER HOLE DIAMETER: 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.121 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN MATERIAL RUBBER SYNTHETIC CENTER HOLE DIAMETER 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
PR504 Interchangeable interchangeable cross-reference
interchangeable
12802E Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 99334?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99334?
99334 is a TERMINAL,STUD manufactured by Verbatim.
What parts can replace 99334?
There are 2 known substitutes for 99334: PR504, 12802E. Substitute compatibility should be verified for your specific system.
Is 99334 still available?
99334 is currently cancelled.