PartsTable
Technical Data Sheet
Download PDF

993 8397 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

993 8397: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 2.00 MILLIMETERS NOMINAL MM, outside_diameter: 18.00 MILLIMETERS NOMINAL MM, center_hole_diameter: 12.70 MILLIMETERS NOMINAL MM, specification/standard_data: 05047-ASME Y14.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD, part_name_assigned_by_controlling_agency: SEAL, WASH, BASE ASSY, CRANE. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-290-6105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
993 8397
NSN: 5330-01-290-6105
FSC: 5330 — Packing and Gasket Materials
CAGE: 34914 — HIAB USA INC (USA)
SPECIFICATIONS
overall_width2.00 MILLIMETERS NOMINAL MM
outside_diameter18.00 MILLIMETERS NOMINAL MM
center_hole_diameter12.70 MILLIMETERS NOMINAL MM
specification/standard_data05047-ASME Y14.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
part_name_assigned_by_controlling_agencySEAL, WASH, BASE ASSY, CRANE
NSN5330-01-290-6105
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 993 8397 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 18.00 MILLIMETERS NOMINAL MM
•
SPECIFICATION/STANDARD DATA: 05047-ASME Y14.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
CENTER HOLE DIAMETER: 12.70 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
OVERALL WIDTH2.00 MILLIMETERS NOMINAL MM
OUTSIDE DIAMETER18.00 MILLIMETERS NOMINAL MM
SPECIFICATION/STANDARD DATA05047-ASME Y14.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
CENTER HOLE DIAMETER12.70 MILLIMETERS NOMINAL MM
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL, WASH, BASE ASSY, CRANE
SUBSTITUTES & CROSS-REFERENCES 1
4444701Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 993 8397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 993 8397?
993 8397 is a GASKET.
What parts can replace 993 8397?
There is 1 known substitute for 993 8397: 4444701. Substitute compatibility should be verified for your specific system.
What is the NSN for 993 8397?
993 8397 is cataloged in the U.S. Government catalog under NSN 5330-01-290-6105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 993 8397