PartsTable / COMPONENT / 992770
992770
✓ Verified by PartsTable
Intellinet · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
- Fiber assembly to terminate cable with fusion splicing.<br>- Available with ST, SC and LC connectors.<br>- Set of 12 pigtails with different colors.<br>- Suitable for use in patch panels using splice cassettes. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-2440, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
992770
NSN: 5340-00-598-2440 FSC: 5340 CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
cushion NOT INCLUDED material STEEL LOCATION NOT OTHERWISE SPECIFIED mounting_pad NOT INCLUDED overall_width 0.375 INCHES NOMINAL IN overall_length 0.750 INCHES NOMINAL IN style_designator CURVED ARCH surface_treatment CADMIUM material_thickness 0.032 INCHES NOMINAL IN mounting_hole_size 0.144 INCHES NOMINAL IN inside_diameter/arch_length 0.313 INCHES NOMINAL IN distance_between_base_and_inside_of_arch 0.156 INCHES NOMINAL IN center_to_center_distance_between_arch_and_mounting_hole 0.375 INCHES NOMINAL IN NSN 5340-00-598-2440
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 992770
MFR: Intellinet
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 0.375 INCHES NOMINAL IN
• MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
• SURFACE TREATMENT: CADMIUM
• STYLE DESIGNATOR: CURVED ARCH
• MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
• MOUNTING PAD: NOT INCLUDED
• INSIDE DIAMETER/ARCH LENGTH: 0.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE 0.375 INCHES NOMINAL IN MATERIAL STEEL LOCATION NOT OTHERWISE SPECIFIED SURFACE TREATMENT CADMIUM STYLE DESIGNATOR CURVED ARCH MATERIAL THICKNESS 0.032 INCHES NOMINAL IN MOUNTING PAD NOT INCLUDED OVERALL WIDTH 0.375 INCHES NOMINAL IN INSIDE DIAMETER/ARCH LENGTH 0.313 INCHES NOMINAL IN MOUNTING HOLE SIZE 0.144 INCHES NOMINAL IN OVERALL LENGTH 0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2450235 Interchangeable interchangeable cross-reference
interchangeable
8545 Interchangeable interchangeable cross-reference
interchangeable
116540 Interchangeable interchangeable cross-reference
interchangeable
00178787 Interchangeable interchangeable cross-reference
interchangeable
7100003P1 Interchangeable interchangeable cross-reference
interchangeable
AN3106A16S1P Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 992770?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 992770?
992770 is a STRAP,RETAINING manufactured by Intellinet.
What parts can replace 992770?
There are 20 known substitutes for 992770: 2450235, 8545, 116540 and 17 more. Substitute compatibility should be verified for your specific system.
Is 992770 still available?
992770 is currently cancelled.