PartsTable
Technical Data Sheet
Download PDF

99276 — FILLER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

99276: FILLER.

The FILLER is a the manufacturer industrial component. Key specifications include end_item_identification: USE ON WORK SURFACE W/ 18.75 X 21.50 INCH CLEAR DIM. IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-095-2695, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99276
NSN: 5310-00-095-2695
NIINs: 000952695, 012054570, 012868130
FSC: 5310 — Nuts and Washers
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
end_item_identificationUSE ON WORK SURFACE W/ 18.75 X 21.50 INCH CLEAR DIM. IN
general_characteristics_item_descriptionADJUSTMENTS 6.875 INCHES UP AND DOWN,5.000 INCHES IN AND OUT,30 DEGREE LEFT OR RIGHT ROTATION AND 30 DEGREE LATERAL SWIVEL; ACYRLIC FINISH; 4650 TAN; O/A DIM. 9.500 X 21.000 INCHES IN
NSN5310-00-095-2695
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 99276 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1120 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1120 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.031 INCHES NOMINAL IN
THICKNESS0.060 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
FF-W-92BReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 99276?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99276?
99276 is a FILLER.
What parts can replace 99276?
There is 1 known substitute for 99276: FF-W-92B. Substitute compatibility should be verified for your specific system.
What is the NSN for 99276?
99276 is cataloged in the U.S. Government catalog under NSN 5310-00-095-2695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99276

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.