PartsTable
Technical Data Sheet
Download PDF

9926134 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9926134: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include nut_length: 1.750 INCHES NOMINAL IN, nut_diameter: 2.000 INCHES NOMINAL IN, thread_series: ACME, flange_diameter: 4.000 INCHES NOMINAL IN, flange_thickness: 0.750 INCHES NOMINAL IN, special_features: NUT HAS 4 DRILLED HOLES, 0.562 NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-502-6677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9926134
NSN: 5310-01-502-6677
FSC: 5310 — Nuts and Washers
CAGE: 18894 — AIR ARMAMENT CENTER/ EN (USA)
SPECIFICATIONS
nut_length1.750 INCHES NOMINAL IN
nut_diameter2.000 INCHES NOMINAL IN
thread_seriesACME
flange_diameter4.000 INCHES NOMINAL IN
flange_thickness0.750 INCHES NOMINAL IN
special_featuresNUT HAS 4 DRILLED HOLES, 0.562 NOMINAL
surface_treatmentPHOSPHATE OVERALL
end_item_identification1730-01-476-9370, JACK, BEVEL GEAR
NSN5310-01-502-6677
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9926134 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 4.000 INCHES NOMINAL IN
•
NUT LENGTH: 1.750 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.750 INCHES NOMINAL IN
•
THREAD SERIES: ACME
•
NUT DIAMETER: 2.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER4.000 INCHES NOMINAL IN
NUT LENGTH1.750 INCHES NOMINAL IN
FLANGE THICKNESS0.750 INCHES NOMINAL IN
THREAD SERIESACME
NUT DIAMETER2.000 INCHES NOMINAL IN
SPECIAL FEATURESNUT HAS 4 DRILLED HOLES, 0.562 NOMINAL
SURFACE TREATMENTPHOSPHATE OVERALL
END ITEM IDENTIFICATION1730-01-476-9370, JACK, BEVEL GEAR
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
09850061Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9926134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9926134?
9926134 is a NUT,SLEEVE.
What parts can replace 9926134?
There is 1 known substitute for 9926134: 09850061. Substitute compatibility should be verified for your specific system.
What is the NSN for 9926134?
9926134 is cataloged in the U.S. Government catalog under NSN 5310-01-502-6677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9926134

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.