PartsTable
Technical Data Sheet
Download PDF

991D — THUMBSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

991D: THUMBSCREW.

The THUMBSCREW is a the manufacturer industrial component. Key specifications include overall_length: 2.000 INCHES NOMINAL IN, overall_diameter: 0.630 INCHES NOMINAL IN, gravity_unit_range: -250.0 TO 1000.0, end_item_identification: 6625-01-282-3746. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-737-7754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
991D
NSN: 5305-00-737-7754
NIINs: 007377754, 010709566, 013281913
FSC: 5305 — Screws
CAGE: 72447 — DANA COMMERCIAL VEHICLE MANUFACTURING, LLC DBA DANA COMMERCIAL VEHICLE PRODUCTS (USA)
SPECIFICATIONS
overall_length2.000 INCHES NOMINAL IN
overall_diameter0.630 INCHES NOMINAL IN
gravity_unit_range-250.0 TO 1000.0
end_item_identification6625-01-282-3746
NSN5305-00-737-7754
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 991D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: KNURLED NO. 1
•
THREAD DIRECTION: LEFT-HAND
•
POINT STYLE: FLAT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
FASTENER LENGTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEKNURLED NO. 1
THREAD DIRECTIONLEFT-HAND
POINT STYLEFLAT
SURFACE TREATMENTZINC OVERALL
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 6
GPW2616BReference document
Same NSN cross-reference
Reference document — Secondary reference
GPW26168Reference document
Same NSN cross-reference
Reference document — Secondary reference
A10331Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SEEGPW2615Reference document
Same NSN cross-reference
Reference document — Secondary reference
47668Reference document
Same NSN cross-reference
Reference document — Secondary reference
7377754Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 991D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 991D?
991D is a THUMBSCREW.
What parts can replace 991D?
There are 6 known substitutes for 991D: GPW2616B, GPW26168, A10331 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 991D?
991D is cataloged in the U.S. Government catalog under NSN 5305-00-737-7754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 991D