PartsTable
Technical Data Sheet
PartsTable / O-RING / 99147
99147 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, body_length: 2.188 INCHES NOMINAL IN, temp_rating: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, rating_method: ELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING, turn_quantity: 210 SINGLE COMPONENT SINGLE WINDING, inclosure_type: FULLY INCLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-274-7854, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99147
NSN: 5331-00-274-7854
FSC: 5331 — O-RING
CAGE: 62323 — CONAX FLORIDA CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
body_length2.188 INCHES NOMINAL IN
temp_rating-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity210 SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
hardness_rating60.0 SHORE DUROMETER A NOMINAL
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
outside_diameter0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
winding_quantity1 SINGLE COMPONENT
center_hole_diameter0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
body_outside_diameter3.000 INCHES NOMINAL IN
NSN5331-00-274-7854
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 99147 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.484 INCHES MINIMUM AND 0.506 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
X25C85Interchangeable
interchangeable cross-reference
interchangeable
B-4TH1166Interchangeable
interchangeable cross-reference
interchangeable
904-11506Interchangeable
interchangeable cross-reference
interchangeable
9-91-47Interchangeable
interchangeable cross-reference
interchangeable
3-904S613-60Interchangeable
interchangeable cross-reference
interchangeable
S0613 3-904Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 99147?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99147?
99147 is a COIL,ELECTRICAL.
What parts can replace 99147?
There are 10 known substitutes for 99147: X25C85, B-4TH1166, 904-11506 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 99147?
99147 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-274-7854. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99147

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026